SHC-Seamless Al Tube-10D

The shielding layer is made of welded seamless aluminum tubes, which significantly improves shielding efficiency and signal transmission quality and also enhances the mechanical strength and life of the cable

By using aluminum tube as the outer conductor, it achieves about half the weight compared to the oxygen-free copper tube. This series is a good choice to reduce unit weight.

Taking full advantage of aluminum, you enjoy the softness on bending. On designing and assembly situation, it is possible to use something like a flexible cable.

Construction 10D
Inner Conductor CCA
Dielectric Material Foamed PE
Outer Conductor Seamless Aluminum Tube
Jacket Black PE or LSZH
Dimensions (Nominal) mm
10D
Diameter Over Inner Conductor 2.60 ± 0.10
Diameter Over Dielectric 7.00 ± 0.30
Diameter Over Outer Conductor 9.00 ± 0.20
Outer Conductor Thickness 0.16 ± 0.01
Diameter Over Outer Jacket 10.4 ± 0.50
Electrical Specification 10D
Impedance 50 ± 2 Ω
Frequency ≤ 13 MHz
Velocity 81 ± 3 %
DC Resistance

—Inner Conductor

—Outer Conductor

—

5.40 Ω/km

6.10 Ω/km
Peak Power Rating ≥ 13.2 KW
Dielectric Resistance ≥ 10,000 MΩ·KM
Dielectric Strength 3500 V
Jacket Sparkling 6800V RMS
VSWR
680 – 1000 MHz ≤ 1.10
1400 – 2700 MHz ≤ 1.13
3400 – 3600 MHz ≤ 1.15
3600 – 4100 MHz ≤ 1.20
4100 – 5000 MHz ≤ 1.25
5000 – 6000 MHz ≤ 1.30
PIM ≤ -155 dBc
Max Attenuation: dB/100m 10D
30 MHz 2.43
450 MHz 9.77
700 MHz 12.34
824 MHz 13.47
960 MHz 14.62
1500 MHz 18.64
1700 MHz 19.97
1800 MHz 20.61
2000 MHz 21.85
2200 MHz 23.04
2400 MHz 24.20
2500 MHz 24.77
2600 MHz 25.47
3500 MHz 29.95
3600 MHz 30.46
3700 MHz 30.94
3800 MHz 31.45
3900 MHz 31.89
4000 MHz 32.34
4100 MHz 32.82
4500 MHz 34.70
4600 MHz 35.13
5000 MHz 36.82
6000 MHz 40.82